Cisco NM-1T3/E3= expansion module


$4,833.00
Call for Price


  • Description
  • Details
  • Reviews
  • IP Network Solution

Cisco NM-1T3/E3= expansion module

Cisco's Packet-over-T3/E3 network module for the Cisco 2600, 3600, and 3700 series offers the first software-configurable T3/E3 product from Cisco. This flexible network module allows the customer to switch between T3 and E3 applications with a single Cisco IOS command. This feature provides customers with unparalleled investment protection by allowing the service provider or enterprise customer to stock only a single product that can be deployed internationally. The demand for increased bandwidth has led to growth in clear-channel T3/E3 deployment. This new Packet-over T3/E3 network module (part number NM-1T3/E3) eliminates the need for an external data service unit (DSU), reduces provisioning costs, and provides highly manageable T3/E3 line termination. The module provides an integrated line interface unit (LIU) DSU that allows T3 or E3 lines to be directly terminated on a Cisco router, eliminating the need for external DSU equipment. This simplifies the T3/E3 line management, reduces provisioning cost, and frees valuable rack space. Offering unprecedented flexibility in provisioning clear-channel T3 or E3 connections, the Cisco T3/E3 network modules provide support for the proprietary subrate and scrambling features of T3 DSU vendors Digital Link, Larscom, and ADC Kentrox. Subrate support in the Cisco T3/E3 Network Module maximizes the utility of these products in service provider environments for tiered DS3 services. By simultaneously supporting interoperability with a wide range of third-party DSU vendors, this network module offers the flexibility to support installed equipment without locking customers into a proprietary solution. The Cisco T3/E3 Network Module provides direct connectivity to a T3 line for full-duplex communications at the T3 rate of 44.736 MHz and full-duplex E3 communications at 34.368 MHz. Each T3 or E3 port consists of a pair of 75-ohm BNC coaxial connectors (Type RG-59), one for transmit data and one for receive data, along with six LED indicators for line status. The Cisco 2650XM and 51XM, Cisco 2691, Cisco 3660, and the Cisco 3725 support a single T3/E3 network module. The Cisco 3745 supports up to two single-port Cisco T3/E3 network modules. Because the Cisco T3/E3 Network Module is supported in Cisco IOS feature sets, including IP Only, there are no additional memory requirements for any supported platforms.

Main Specifications

Product Description Cisco expansion module
Device Type Expansion module
Form Factor Plug-in module
Dimensions (WxDxH) 7.1 in x 7.2 in x 1.5 in
Data Link Protocol ATM, HDLC, Frame Relay, PPP
Line Rate T-3/E-3
Compliant Standards ANSI T1.102, ANSI T1.107
System Requirements Cisco IOS 12.2(11)YT

General

Device Type Expansion module
Form Factor Plug-in module
Width 7.1 in
Depth 7.2 in
Height 1.5 in

Networking

Connectivity Technology Wired
Data Link Protocol ATM, HDLC, Frame Relay, PPP
Line Rate T-3/E-3
Line Coding Format HDB3, B3ZS
Status Indicators Active, carrier detect, alarm
Compliant Standards ANSI T1.102, ANSI T1.107

Expansion / Connectivity

Interfaces 1 x network - T3/E3 - BNC x 2
Compatible Slots 1 x expansion slot

Miscellaneous

Compliant Standards CSA, TUV GS, VCCI, EN 60950, EN 61000-3-2, EN50082, EN55022, ICES-003, IEC950, UL 1950

Software / System Requirements

OS Required Cisco IOS 12.2(11)YT

Environmental Parameters

Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 90%

  • Model: NM-1T3/E3=
  • Manufactured by: Cisco Systems

Be the first to write a review.  Write a Review.
your alt text here
Your IP cameras no longer need a special infrastructure.

Now you can integrate your old and trusted analog infrastructure with the new and feature packed IP network!



Credit Card Footer
Content

IP PBX

IP PBXs for every bussiness. Find yours!



epygi pbx